Vinyl Fence Cost Calculator
Panels, posts and total cost for a vinyl fence run.
Enter your values
Enter the fence length in ft.
Enter the panel width in ft.
Enter the cost per panel in $.
Enter the cost per post in $.
Enter the gates you are working with.
Enter the cost per gate in $.
Enter the install per foot in $.
Results update instantly as you type — no submit needed. Your values are remembered on this device, and the shareable link reopens the calculator with exactly these numbers.
- Total installed cost
- $4,875.00
- Panels
- 19
- Posts
- 21
- Material cost
- $3,075.00
- Installation
- $1,800.00
- Cost per foot
- $32.50
Working
- 119 panels + 21 posts + 1 gate(s) = $3,075.00 in materials
Quick answer
Panels = fence length divided by panel width, rounded up. Posts are panels plus one, plus an extra post for each gate.
panels = length / panel width; posts = panels + 1 + gates
At a glance
| What it does | Panels, posts and total cost for a vinyl fence run. |
|---|---|
| Category | Home & DIY |
| Inputs needed | Fence length, Panel width, Cost per panel, Cost per post, Gates, Cost per gate, Install per foot |
| Main output | Total installed cost |
| Formula | panels = length / panel width; posts = panels + 1 + gates |
| Cost | Free — no sign-up, no download |
How to use the Vinyl Fence Cost Calculator
- 1Measure the fence line, and note where gates go.
- 2Enter your panel width - 6 and 8 ft are the common sizes.
- 3Include installation, or set it to zero if you are doing it yourself.
Inputs explained
- Fence length(ft)
- Enter the fence length in ft.
- Panel width(ft)
- Enter the panel width in ft.
- Cost per panel($)
- Enter the cost per panel in $.
- Cost per post($)
- Enter the cost per post in $.
- Gates
- Enter the gates you are working with.
- Cost per gate($)
- Enter the cost per gate in $.
- Install per foot($)
- Enter the install per foot in $.
Worked example
Using the values the calculator loads with:
Inputs
- Fence length150 ft
- Panel width8 ft
- Cost per panel110 $
- Cost per post35 $
- Gates1
- Cost per gate250 $
- Install per foot12 $
Results
- Total installed cost$4,875.00
- Panels19
- Posts21
- Material cost$3,075.00
- Installation$1,800.00
- Cost per foot$32.50
- 19 panels + 21 posts + 1 gate(s) = $3,075.00 in materials
Frequently asked questions
Is vinyl fencing cheaper than wood?
It costs more upfront but needs no staining and lasts 25+ years, so the lifetime cost is often lower than cedar.
How deep do vinyl fence posts go?
At least a third of the post height and below frost line, set in concrete - vinyl posts rely entirely on the footing for strength.
What do I need to enter into the Vinyl Fence Cost Calculator?
Just 7 values: fence length, panel width, cost per panel, cost per post, gates, cost per gate, install per foot. Every field starts with a realistic example, so you can change one number at a time and watch the result update instantly.
How does the Vinyl Fence Cost Calculator work out the answer?
Panels = fence length divided by panel width, rounded up. Posts are panels plus one, plus an extra post for each gate. It applies the formula panels = length / panel width; posts = panels + 1 + gates and shows the working so you can check each step by hand.
Is the Vinyl Fence Cost Calculator free, and do I need an account?
It is completely free with no sign-up, no download and no usage limit. Everything is calculated in your browser, so the numbers you type never leave your device.
Results are estimates for general information. For medical, legal, structural or financial decisions, confirm with a qualified professional.